The Extender is based on the HDBaseT technology. It extends your HD display with the resolution of 1080p/60Hz up
to 330 feet (100 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. It can also extend the
Ethernet, IR, RS232 signals by using the same Cat5e/6 cable at the time. Built-in IR extender function allows IR remote
control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display
back to the Source devices. It also provides POE function that you only need to provide a piece of 48V/1ADC power
adapter at the end of the Sender to supply the power for both the end of the Sender and Receiver.
Support uncompressed HDMI signal.
Enable HDMI 10.2Gbps over a single100mCat5e/6 cable.
Support 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Support 1080p@60Hz@48bit pixels.
Support 3D pass-through.
Support CEC pass-through.
Support uncompressed audio
Support compressed audio
Support Ethernet transmission at the time.
Support RS232 signal bypass.
Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending
IR commands received in the vicinity of the Display back to the Source devices.
CAT5e/6 cable follows the standard of IEEE-568B.
|Support||HDMI 10.2Gbps over a single100mCat5e/6 cable|
|Support||340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth|